Zen body shower heads are designed to offer a tranquil and rejuvenating shower experience, mirroring the calmness of a Zen garden. They often feature multiple settings, allowing users to choose between a gentle rainfall or a more invigorating massage spray.
The design of these shower heads usually emphasizes minimalism and elegance, often incorporating materials and colors that evoke a sense of peace and serenity. Additionally, Zen body shower heads are known for their water efficiency, making them a popular choice for eco-conscious consumers seeking a spa-like experience in their own bathrooms.
Guide to Install a Zen Body Shower Head
Tools Required
- Adjustable Wrench
- Teflon Tape
- Cloth or Towel
- Pliers
- Screwdriver
Detailed Instructions
Turn Off the Water Supply
Before installing your Zen Body shower head, ensure that the water supply to your shower is completely turned off. This prevents any water from flowing out while you’re working.
Remove Old Shower Head
Using the adjustable wrench, gently unscrew the old shower head from the shower arm. Use a cloth to grip and protect the shower arm from scratches. Rotate the shower head counterclockwise until it’s free.
Clean the Shower Arm Threads
Inspect and clean the threads on the shower arm. Remove any debris or old Teflon tape to ensure a clean fit for the new Zen Body shower head. A clean thread ensures a leak-free installation.
Apply Teflon Tape
Wrap Teflon tape around the threads of the shower arm in a clockwise direction. This helps to create a better seal and prevents leaks when you install the Zen Body shower head.
Attach the Zen Body Shower Head
Carefully align the Zen Body shower head with the shower arm threads. Hand-tighten the shower head onto the arm. Avoid using too much force to prevent damaging the threads.
Secure the Shower Head
Once the Zen Body shower head is hand-tightened, use the adjustable wrench to securely fasten it. Be careful not to overtighten, as this can damage both the shower head and the arm.
Check for Leaks
Turn the water supply back on and inspect the newly installed Zen Body shower head for leaks. If you notice a leak, slightly tighten the shower head until the leak stops.
Final Adjustments
Make any final adjustments to the position of your Zen Body shower head. Ensure that it’s angled correctly for your preferred shower experience.
Special Features of Zen Body Shower Heads
- Water Saving and Increased Pressure: The Zen Body Shower Head is engineered to save up to 35% of water while providing a 200% increase in water pressure compared to traditional shower heads. This leads to a more efficient shower and contributes to environmental conservation and meets the standards set by EPA.
- Multiple Spray Settings: It features six different spray settings, including options like rainfall, mist, and massage. These settings offer a customizable shower experience, allowing you to choose the type of spray that best suits your mood or needs on any given day.
- Purifying Stones: The Zen Body Shower Head is equipped with Maifan stones, which are known for their water purifying properties. These stones help remove impurities such as heavy metals, lead, fluoride, chlorine, and harmful bacteria, leading to cleaner and healthier water.
- Skin and Hair Benefits: With the inclusion of vitamin C beads and a multi-filter system, the Zen Body Shower Head is designed to be beneficial for both skin and hair. The filtering system reduces bacteria and impurities, potentially improving skin and hair health.
- Eco-Friendly Design: This shower head is environmentally friendly, offering features like a natural filtration system and a construction that is mindful of the planet. It’s designed to save water and energy while providing a luxurious shower experience.
Tips for Installing a New Shower Head
- Choose the Right Shower Head: Before starting the installation, select a shower head that fits your needs and matches your plumbing. Most connections are universal, but it’s good to verify compatibility.
- Remove the Old Shower Head: Try unscrewing the old shower head by hand. If it’s tight, use slip-joint pliers wrapped in electrical tape or a towel to protect the finish, and an adjustable wrench to loosen it.
- Clean Shower Arm Threads: Once the old shower head is removed, clean any rust, mineral deposits, or old sealant from the shower arm threads. A wire brush can be effective for this task.
- Apply Thread Seal Tape: Wrap thread seal tape (often known as plumber’s tape) clockwise around the shower arm’s threads to ensure a good seal and prevent leaks.
- Install the New Shower Head: Screw the new shower head onto the shower arm. Be cautious not to overtighten, as this can damage the threads or the shower head. Hand tightening is often sufficient.
- Check for Leaks: After installation, turn on the water to check for leaks. If leaks are detected, you may need to reapply thread seal tape and tighten the connection a bit more.
- Secure and Adjust the Shower Head: If necessary, use pliers to secure the shower head, but ensure you protect the finish. Adjust the shower head angle as needed for the optimal showering experience.
Frequently Asked Questions
How to change beads in a Zen Body shower head?
The beads can be replaced by simply unscrewing the beads compartment, removing the old beads, and replacing with new ones. The beads are actually small stones that help purify water by removing heavy metals, lead, fluoride, chlorine, chemicals & harmful bacteria. The beads need to be replaced every 4-6 months, depending on water quality and usage.
Do Zen Body shower heads fit all standard fittings?
Yes. Zen Body shower heads can fit all standard fittings. If you have a 1/2-inch thread fitting, you can easily install a Zen Body shower head without any problems.
Why is my old shower head clogged?
Your old shower head is likely clogged due to the accumulation of mineral deposits, primarily from hard water. These deposits can build up over time, blocking the holes of the shower head and impeding water flow.
Why is my shower head not delivering good pressure?
The reason for poor pressure in your shower head could be due to several factors, including clogged nozzles from mineral buildup, a partially closed control valve, kinked or damaged pipes, or a general reduction in your home’s water pressure.
How to increase pressure from a shower head?
To increase pressure from a shower head, start by cleaning it to remove any mineral deposits. If that doesn’t work, check if the flow restrictor inside the shower head is causing the issue. You can also inspect for any blockages or kinks in the pipes or consider installing a shower head specifically designed for low water pressure scenarios.
